Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Henderson Homeowners
Hardwood floors in Henderson take a beating. Desert air is dry most of the year, then summer monsoon humidity rolls in, and the boards swell, shrink and shift with every swing. Add years of grit underfoot and UV light pouring through west-facing windows, and a floor that looked warm and finished a decade ago can go dull, gray and scratched before the wood itself is anywhere near worn out. Refinishing is how you bring that surface back without tearing out sound flooring. Our technicians have up to 9 years of experience sanding, staining and restoring hardwood, and we treat your existing floor as a restoration job, not an excuse to sell you a replacement. One dedicated installer handles the refinishing, and if another room needs new carpet or tile, the same call covers it. Call (844) 460-4481 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Hardwood Floor Refinishing Service Includes
Refinishing isn’t one job, it’s a set of steps that get matched to the condition of your floor. Some homes need the full sand-and-finish cycle; others only need a scuff and a fresh coat. Here’s how we break down the work.
Hardwood Floor Sanding
Sanding removes the old finish and the top layer of the wood, leveling out scratches, dents and uneven wear in high-traffic rooms. You need it when the finish has worn through in patches or the boards have cupped and crowned from moisture swings. We sand in stages with progressively finer grits, then vacuum and tack the floor so the new finish has a clean surface to bond to. Whether your floor can be sanded at all depends on how thick the wear layer is, and we check that at the estimate visit before promising anything.

Hardwood Floor Staining
Staining changes the color of the wood after sanding, either to refresh a faded tone or to shift the whole room toward a different look. It’s the step to consider when the finish is dull but the color has gone uneven or dated. We apply stain in a controlled way and check how the wood takes it before locking in the whole floor, since species and age both affect the result. A stain can get close to a sample, but every floor reads a little differently, and we tell you that up front rather than promising an exact match.

Hardwood Floor Restoration
Restoration covers floors that have real damage, not just cosmetic wear: water staining, deep gouges, board replacement, gaps and patching where a wall came out. You need it when the floor has been neglected or something happened to it, and you’d rather save the original wood than cover it up. We identify which boards can be saved and which need swapping, then sand and finish the whole floor so the repair disappears into the surrounding wood.

Hardwood Floor Buffing
Buffing is a light mechanical scuff of the existing finish, followed by a fresh coat, and it’s the right call when the floor is intact but looking tired. It’s for floors where the finish is dull and lightly marked but hasn’t worn through to bare wood. We use it to bring back sheen without the dust and depth of a full sand, and we tell you honestly when a buff won’t be enough.
Screen and Recoat Hardwood Floors
A screen and recoat is a finer version of buffing: the top coat is abraded lightly with a screen, cleaned off, and a new coat is laid over it. This is the maintenance step that keeps a healthy floor healthy and delays the day it needs a full sand. It only works when the existing finish is still bonded and there’s no wax or oil contamination, so we test the surface before recommending it.
Stair Refinishing
Stairs wear faster than any floor in the house because every footfall lands on the same treads. Refinishing them means sanding the treads, risers and railings and finishing them to match the floor below. If your stairs creak, the same visit is a good time to address the structure before the finish goes on.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Refinishing is about the wood and the finish already in your home, so the brand conversation usually comes up when a floor is at the end of its life or a new room is being added. When that happens, we install and work with Shaw and Mohawk hardwood, and we’re just as comfortable with the engineered and rigid-core lines from COREtec and Pergo that show up in Henderson homes built or updated more recently. Our knowledge of those products comes from installing them, not from a shelf in a showroom, so we can talk through how a particular plank behaves under desert humidity and how it takes a finish.
We’re brand-agnostic within that portfolio. If you’ve already chosen a product, we install what you’ve picked and won’t steer you toward a house brand. If you’re undecided, we’ll point you toward what fits the room, the subfloor and the way your household actually lives. Whether you have Shaw, Mohawk, COREtec, Pergo, or a floor from another maker entirely, we can help you decide between refinishing what’s there and starting fresh.
Signs You Need Hardwood Floor Refinishing Right Now
- Dull, gray patches in traffic lanes: The finish has worn thin where feet and furniture move most, which lets moisture and dirt into the wood. Once the bare wood starts to gray, a screen and recoat is no longer enough and you’re into a full sand.
- Deep scratches you can feel with a fingernail: Surface scuffs are cosmetic, but scratches that catch mean the finish and some of the wood are gone. Left alone, they collect grit that grinds deeper with every step.
- Cupping, crowning or gaps between boards: These are signs the wood is reacting to moisture swings, common in Henderson when dry seasons give way to humid ones. Refinishing can level minor movement, but we check for a moisture source first so the problem doesn’t come back.
- Water rings, dark stains or pet marks: Discoloration means moisture has gotten into the wood, and light stains often sand out while deep ones need board replacement. Catching them early usually means less restoration work.
- A finish that peels, flakes or feels sticky: This points to a failed or contaminated top coat that won’t protect the wood anymore. Recoating over a failing finish traps the problem, so it needs to come off.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and estimate. We walk the floor with you, check the wear layer thickness, look for moisture issues and map out the traffic areas. You get a written price before any work is booked, and the schedule is set at that visit.
- 2
Prep and protection. We seal off the work area, protect adjacent rooms and set up dust control. Refinishing is dusty work, and good containment is the difference between a clean house and a week of cleaning up after us.
- 3
Sanding and leveling. We sand in stages, feathering out scratches and leveling minor unevenness, then detail the edges and corners by hand. We check the surface under raking light so nothing gets missed before finish goes down.
- 4
Staining and finishing. If you’re changing color, the stain goes on first, followed by the top coats according to the product’s instructions. We let each coat set properly rather than rushing the schedule, because the finish is what you’ll live on for years.
- 5
Final walkthrough. We inspect the finished floor with you, go over care and cleaning, and confirm the cure time before you move furniture back. Any questions about the finish, you call us.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Henderson?
A typical hardwood floor refinishing project in Henderson runs $1,675 – $4,650 for a 500 to 800 square foot job, and that’s the installed price with labor and finish included. Hardwood refinishing starts from about $3 per square foot, though the exact price per square foot depends on the product, the room and the condition of the subfloor and the wood itself. Smaller jobs like a single room or a screen and recoat sit toward the lower end, while whole-floor restorations with staining or board replacement land higher.
What moves the number: the square footage, how much sanding the wood needs, whether you’re staining, and how much repair the floor requires. Stairs add work because every tread is finished by hand. To avoid overpaying, get a written estimate that spells out the sanding, staining and finish coats separately, and be wary of a quote that skips the wear-layer check. Our free estimate includes the measure, a walkthrough of the floor’s condition and a written price, and that written estimate sets the final cost.
Hardwood Floor Refinishing Near Henderson – Our Service Area
We refinish hardwood for homeowners across Henderson and the surrounding valley, including Whitney, Paradise, Winchester, Enterprise and Boulder City. Scheduling depends on the job and the season, and we set the install day at your estimate rather than promising a window we can’t keep. If you’re nearby and thinking about restoring a floor, start with Henderson Flooring Installation and we’ll take it from there.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Henderson
Hardwood floor refinishing is sanding off the old finish and worn top layer of wood, then applying new stain and finish to restore the floor’s appearance and protection. It’s different from installation because you’re keeping the original wood and bringing it back to life. It works best on solid hardwood with enough wear layer left to sand, which we check at the estimate visit.
The timeline depends on the size of the floor and how many finish coats it needs, and we set the schedule at your estimate. Drying and cure time between coats are part of the process and can’t be rushed. We give you a realistic window up front so you can plan furniture and foot traffic.
Typical estimated pricing for hardwood floor refinishing in Henderson is $1,675 – $4,650 for a 500 to 800 square foot project, with refinishing starting from about $3 per square foot. The final price depends on square footage, condition, staining and any repairs, and the written estimate sets it. Call (844) 460-4481 for an exact quote; estimates are free.
Yes, we install and work with Shaw and Mohawk hardwood, along with COREtec and Pergo. If your floor needs refinishing, the brand matters less than the wood’s condition and wear layer, which we assess in person. If you’re choosing a new floor for another room, we can talk through the options from those brands.
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Refinishing is a scheduled job, so the usual path is a free in-home measure and estimate first, then a written price, then a booked install day. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Coverage depends on the finish product used and the written estimate that spells it out, so ask at your estimate visit. We stand behind the workmanship on the installation, and the product instructions govern the finish itself. If anything about the finished floor concerns you, call us and we’ll take a look.
Clear the room of furniture and breakables, and plan for foot traffic to stay off the floor during finish and cure time. We handle dust containment and protection for adjacent rooms. Before we start, we’ll walk you through exactly what to move and when the floor is safe to use again.
Schedule Your Hardwood Floor Refinishing Service in Henderson Today
Bring your floors back to their original finish with a free in-home estimate. Call (844) 460-4481 and we’ll walk the floor with you, check the wood and put a written price in your hands before anything is booked. We answer 24/7. Licenced & insured, upfront pricing, no obligation. The right floor, installed the right way.
Written by the team at Henderson Flooring Installation.