Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Henderson?
Hardwood floor refinishing in Henderson typically costs between $1,675 and $4,650 for a 500 to 800 square foot project, including sanding, staining and finish coats. That’s the installed estimate for a full refinish, not a per-square-foot price. The final number is set by the written estimate after we walk the floor.
Most Henderson homes with older hardwood fall somewhere in the middle of that range. A light screen-and-recoat sits at the low end. A full sand-down with stain and multiple finish coats pushes toward the top. We’re a flooring specialist, not a generalist remodeler, and refinishing is one of the three disciplines we handle alongside carpet and tile, so we’re looking at your whole floor plan, not just one room.
Key Takeaways
- Typical refinishing range in Henderson: $1,675 to $4,650 for 500 to 800 square feet.
- Per-square-foot starting point: from about $3, but the product, the room and the subfloor change that.
- Full sand-down vs. recoat: the biggest swing in price, and it depends on how much finish is left.
- Free estimates and a written price before any work starts.
- We refinish what you already have. No new product sale required.
Hardwood Floor Refinishing Cost Breakdown (2026)
Here’s how a typical Henderson refinishing job breaks down. These are estimated ranges, and the written estimate sets the final price.
| Line Item | Typical Estimated Range |
|---|---|
| Full sand-down and refinish (500 to 800 sq ft) | $1,675 – $4,650 |
| Screen and recoat (light refresh, no bare wood) | Lower end of the range above |
| Stain application (color change or custom tone) | Included in full refinish; adds time and labor |
| Board repair or replacement (gaps, damaged planks) | $230 – $1,395 |
| Per-square-foot starting point for refinishing | from about $3 |
The range is wide because a refinish isn’t one job. A floor that’s been under carpet for years with light wear sands clean and takes finish well. A floor with water damage, deep scratches or a failed finish from a previous job takes more passes, more sanding discs and more time. The number of finish coats matters too, since each coat is a separate step with its own dry time between passes. On a broad, open-plan Henderson layout, you’re working a large continuous surface, and every square foot of that gets the same passes.
Refinishing is priced separately from new installation. If you’re weighing bringing your current floor back versus laying a new one, the hardwood floor installation range runs $4,185 to $11,160 for the same footprint, which is why a refinish is often the sensible route when the existing boards are sound. Sanding and finish work touch bare wood and moving machines, so we always check board thickness and condition at the estimate before promising a refinish will work. Some floors can’t take another sanding pass, and we’ll tell you that up front rather than learn it mid-job.
What Affects Hardwood Floor Refinishing Pricing in Henderson
- Condition of the existing finish. A worn but intact finish may only need a screen and recoat at the low end. Bare wood, deep scratches or a peeling finish means a full sand-down toward the top of the range.
- Board thickness and how many times it’s been sanded. Every refinish removes a thin layer of wood. A floor that’s already been sanded down close to the tongue limits how much material is left to work with. We check this at the estimate, and it’s the single biggest reason a refinish quote can change.
- Square footage and room count. Open floor plans common in newer Henderson builds give one continuous surface to sand. A run of small, tight rooms with closets, thresholds and furniture to move adds labor per square foot.
- Stain and finish choice. A clear coat is straightforward. A color change or a custom stain takes test patches and careful control across the whole floor so it reads even, and that adds labor.
- Repairs under the finish. Squeaks, gaps, cupped boards or planks that need replacing get handled before sanding starts, and that work is priced as floor repair at $230 to $1,395 per job.
- Desert air and indoor humidity. Henderson’s dry climate and big day-to-night temperature swings mean wood moves. We look at gaps and cupping that come from that movement before deciding how much sanding the floor needs. Too aggressive a pass on a floor that’s moved will leave you with an uneven surface, so we plan the sanding around what the boards are doing, not just what the finish looks like.
How to Save on Hardwood Floor Refinishing
The biggest savings come from timing and scope, not from finding a lower price per square foot. A few practical ways to keep the estimate down:
- Refinish before the finish fails completely. A recoat while the finish still has some life is cheaper than a full sand-down after it’s worn through to bare wood. Catching it early is the single best way to stay near the low end of $1,675 to $4,650.
- Keep the color you have. Staying with the same stain tone avoids the test patches and careful color-matching a change requires.
- Bundle repairs into the refinish. Squeaks and gaps get fixed more cheaply when the floor is already being sanded than as a separate visit later.
- Clear the rooms. Moving furniture and rugs out yourself before the job starts cuts labor time.
- Refinish more than one room at once. The setup and sanding passes on a single continuous floor spread the same work over more area.
We give free estimates and put the price in writing before anything starts. Call (844) 460-4481 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What a Hardwood Refinishing Job Actually Involves
Refinishing is a sequence, and the sequence is why it’s priced the way it is. We start by checking board thickness and condition, then repair any planks that need it before sanding begins. The sanding itself runs through multiple grits to remove the old finish and level the surface. Any stain goes down next, then the finish coats, each with time between for it to set. The written estimate sets the schedule, because dry time between coats depends on the product and the home’s conditions.
We don’t promise that every floor can be refinished or that a stain will match a sample perfectly. It depends on the thickness of the wood and its condition, checked at the estimate visit. Refinishing removes wood, and there’s a limit to how much a floor has left. That’s a conversation we have before the job, not after.
How Henderson Refinishing Compares to the Other Options
Refinishing sits between a simple repair and a full new install. If a few boards are damaged and the rest of the floor is sound, floor repair at $230 to $1,395 per job fixes the specific problem without touching the whole surface. If the boards have reached the end of their sandable life or the layout needs a change, a new hardwood install runs $4,185 to $11,160 for the same footprint. Refinishing at $1,675 to $4,650 is the middle path, and it’s the one that keeps the floor you already have.
Some homeowners use the refinish as a chance to look at the rest of the house. Carpet installation runs $1,395 to $4,650, and tile flooring installation runs $2,790 to $8,370 for a comparable footprint, so a whole-home plan can be built in one conversation. When we’re out for a refinishing estimate, we can look at the other floors at the same time and give you a single written scope. We install products from Shaw, Mohawk, COREtec, Pergo, LifeProof, Mannington, Armstrong, Daltile and Karndean, and we install what you’ve already chosen or help you choose from brands we know work. For the broader range of options in the area, see our Henderson Flooring Installation overview.
Why Refinishing in Henderson Has Its Own Considerations
Henderson homes are built for desert living, and that shapes a refinishing job. The dry air pulls moisture out of wood indoors, and the gap between summer heat and cooler nights makes boards move a little season by season. That movement shows up as small gaps and the occasional cupped edge, and it’s exactly the kind of thing we check before deciding how much sanding a floor can take. On the other side, wood floors under older carpet in established Henderson neighborhoods often come out in better shape than expected, because the finish was protected for years. Either way, we plan the sanding around what the wood is doing, and a refinish that respects the board’s condition lasts longer than a fast, aggressive pass. Our Henderson page covers the areas we work in and what we see across the city.
Repair or Replace? A Refinishing Reality Check
Three signs tell you a floor is worth refinishing rather than replacing. First, the wear is in the finish, not through it to splintering bare wood. Second, the boards are flat and stable, without widespread cupping or a pattern of movement that’s already failed. Third, the floor has enough thickness left to sand once more. If all three hold, refinishing gets you a restored surface at a fraction of a new install. If any one fails, we’ll say so at the estimate and talk through repair or replacement, because a refinish on a floor that can’t take it is money spent on a result that won’t hold.
None of that is a do-it-yourself decision. Sanding equipment and finish application are best handled by a trained professional, and a poor pass is hard to undo. We’re happy to walk through the options with you not commit you to anything; the estimate is free and the price is set per job in writing.
FAQs – Hardwood Floor Refinishing Cost
How much does hardwood floor refinishing cost in Henderson?
It typically costs $1,675 to $4,650 for a 500 to 800 square foot project, including sanding, stain and finish. The per-square-foot starting point is from about $3, and the written estimate sets the final price. Call (844) 460-4481 for an exact quote; estimates are free.
Is it cheaper to refinish or replace hardwood floors?
Refinishing is generally cheaper: $1,675 to $4,650 versus $4,185 to $11,160 for a new install of the same footprint. Refinishing wins when the existing boards are sound and thick enough to sand; replacement wins when they aren’t. An estimate visit settles which applies to your floor. Call (844) 460-4481 to book one.
How much does a screen and recoat cost compared with a full refinish in Henderson?
A screen and recoat sits at the low end of the $1,675 to $4,650 range, while a full sand-down pushes toward the top. A recoat only works when the finish still has life and there’s no bare wood showing. Call (844) 460-4481 and we’ll tell you which your floor needs.
Do I need floor repairs before refinishing, and what do they cost?
Repairs are only needed if planks are damaged, cupped or loose, and they run $230 to $1,395 per job. Fixing them before sanding is cheaper than doing it as a separate visit later. Call (844) 460-4481 for a combined estimate.
Can you come out today for a refinishing estimate in Henderson?
In many cases yes; same-day estimates are often possible, and the estimate itself is free. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 460-4481 to get on the schedule.
Ready to Bring Your Floors Back?
Refinishing brings an existing hardwood floor back to its original finish without paying for new wood. That’s why we treat it as a discipline of its own, separate from installation. If you have older hardwood underfoot and you’re not sure whether it can be saved, that’s what the estimate is for. Our technicians have up to 9 years of experience, and the estimate is free. Call (844) 460-4481. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Henderson market as of 2026. Henderson Flooring Installation offers free estimates – call (844) 460-4481.
Written by the team at Henderson Flooring Installation.
What Our Customers Say
"Replaced about a dozen damaged boards in an older hardwood floor and the new ones blend in so well I had to ask him which ones they were."
- Allen Lin"Sanded and refinished the hardwood in our hallway and two bedrooms. The dust control was better than I expected, and the grey traffic path by the front door is gone."
- Ramon Salazar"Our old carpet had rippled in the living room. They stretched it back flat instead of selling me new carpet, and it has stayed tight."
- Hector Morales