Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Installation Cost in Henderson?
Hardwood floor installation in Henderson typically costs $4,185 to $11,160 for a 500 to 800 square foot project, materials and labor included. That range covers solid and engineered hardwood in the rooms Henderson homeowners most often upgrade. The written estimate you get after we look at your subfloor sets the final price.
It’s a wide spread because hardwood is the most variable floor we install. The same square footage can land at opposite ends of that range depending on the species, the board width, how flat and dry the subfloor is, and how much furniture and trim work has to come out first. Here’s what each part of the bill actually covers.
Hardwood Floor Installation Cost Breakdown (2026)
Most Henderson hardwood jobs break down into the categories below. Treat these as typical estimated ranges for a 500 to 800 square foot project, not a quote for your home.
| Line Item | Typical Estimated Range |
|---|---|
| Hardwood flooring material (solid or engineered) | Major share of the $4,185 – $11,160 total; from about $8 per square foot at the starting point |
| Labor for installation | Included in the $4,185 – $11,160 installed range |
| Underlayment and moisture barrier | Bundled into the installed range |
| Subfloor prep (leveling, patching, removing old flooring) | Added where needed; quoted in the written estimate |
| Trim, baseboard removal and reinstall | Quoted per room in the written estimate |
| Hardwood refinishing (if restoring existing floors instead) | $1,675 – $4,650; from about $3 per square foot at the starting point |
The $8 per square foot hardwood starting point is just that: a starting point. Species, grade and board width move the material price a lot, and so does the room. A single open great room is a simpler job than four bedrooms and a hallway with doorways to cut around. Engineered hardwood and solid hardwood don’t behave the same over a Henderson slab or a raised subfloor either, and we’ll tell you which one fits your home rather than talk you into what’s easiest.
For comparison across the three categories we install: tile flooring installation in Henderson runs $2,790 to $8,370, and carpet installation runs $1,395 to $4,650 on the same 500 to 800 square foot basis. Hardwood sits at the top of our range because the material costs more and the install is unforgiving. If you’re weighing options, the Henderson Flooring Installation pages cover each floor type side by side.
What the price per square foot actually says
We quote hardwood from about $8 per square foot as a starting point, but the number per square foot depends on the product, the room and the subfloor. Two homes on the same street in Henderson can come back at different per-square-foot figures because one has a flat slab ready to go and the other needs leveling first. That’s why the written estimate, not the starting point, is what you budget against.
What Affects Hardwood Floor Installation Pricing in Henderson
Henderson’s climate and housing stock shape a hardwood job more than people expect. The desert air is dry most of the year, and indoor humidity swings with the seasons, which matters for how wood behaves once it’s down. Here are the factors that move your estimate up or down.
- Subfloor condition. A flat, sound subfloor keeps the job in the lower half of the range. A slab that’s out of level, or a raised subfloor with soft spots, means prep work before a single board goes down. We check this at the estimate, because it’s the single biggest swing in price.
- Solid versus engineered hardwood. Solid hardwood is the more expensive material and doesn’t suit every subfloor. Engineered hardwood handles slab and moisture conditions better in a dry desert market, and it’s often the smarter call. We walk you through both.
- Species, grade and board width. Wider boards and premium species cost more. This is a material decision you make, and we install what you choose from the brands we work with, including Shaw, Mohawk, Mannington and Armstrong.
- Moisture and acclimation. Wood has to acclimate to the home before installation, and how long depends on the product and the house. The product instructions and the written estimate set that schedule. Rush it and a Henderson floor can gap or cup later.
- Room count and layout. Cutting around doorways, closets, cabinets and angles takes time. A wide-open layout installs faster per square foot than a warren of small rooms.
- Old flooring removal. Pulling up carpet, tile or an existing floor adds labor and disposal. Sometimes it’s a clean tear-out; sometimes it’s a surprise underneath. We quote it before we start, not after.
If your existing hardwood just needs a refresh rather than a full tear-out, refinishing at $1,675 to $4,650 usually beats the cost of a new install. We offer it as a standalone service, which a lot of install-only contractors don’t, so you don’t have to call a separate crew to bring your floors back to their original finish. Whether a given floor can be refinished depends on the thickness of the wood and its condition, and we check that at the estimate visit.
How to Save on Hardwood Floor Installation
You don’t need to cut corners on material to keep a hardwood project in budget. A few decisions make a real difference.
- Get the estimate before you buy. Choose the floor with the subfloor in front of us. A product that needs heavy prep can erase the savings of a cheaper board.
- Consider engineered hardwood for tricky rooms. It often fits slab and moisture conditions in Henderson with less prep than solid hardwood, which can keep you out of the higher end of the $4,185 to $11,160 range.
- Refinish instead of replace where you can. If the existing wood is thick enough and sound, refinishing at $1,675 to $4,650 is the cheaper path to a fresh floor.
- Bundle rooms in one project. Doing the great room and hallway together spreads the prep and trim work across more square footage than two separate visits.
- Clear the rooms ahead of time. Moving furniture and personal items out yourself saves labor. It’s small, but it counts.
Start with a free estimate. Call (844) 460-4481 and we’ll look at the subfloor, talk through solid versus engineered, and give you a written price you can plan around. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Repair before you replace
Not every worn hardwood floor needs a full install. A cupped board, a squeak, a damaged section near a doorway may qualify for floor repair at $230 to $1,395 per job. It’s worth asking before you commit to a tear-out. During the estimate we’ll tell you honestly whether a repair makes sense or whether the floor is past the point of patching.
FAQs – Hardwood Floor Installation Cost
How much does hardwood floor installation cost in Henderson?
Expect $4,185 to $11,160 for a 500 to 800 square foot project, installed, with materials and labor included. The spread comes from species, board width, subfloor condition and how much prep the rooms need. For an exact number, call (844) 460-4481 for a free estimate.
Is it cheaper to refinish or replace hardwood floors in Henderson?
Refinishing at $1,675 to $4,650 is cheaper than a new install at $4,185 to $11,160, as long as the wood is thick enough and in sound condition. We check both at the estimate and tell you which makes sense. A floor that’s too thin or too damaged to refinish is where replacement wins. Call (844) 460-4481 and we’ll look before you decide.
What’s the price per square foot for hardwood in Henderson?
Hardwood starts from about $8 per square foot, though the final per-square-foot price depends on the product, the room and the subfloor. We don’t quote per square foot blind; the written estimate sets the real number. Free estimates: (844) 460-4481.
Can you install hardwood over a concrete slab in Henderson?
Often yes, using engineered hardwood, which handles slab and moisture conditions better than solid hardwood. Solid hardwood usually needs a raised subfloor. We’ll tell you which fits your home at the estimate. Call (844) 460-4481 to schedule one.
Do you install the hardwood brands I’ve already chosen?
Yes. We install and work with Shaw, Mohawk, COREtec, Pergo, LifeProof, Mannington, Armstrong, Daltile and Karndean, so if you’ve already picked a product, we’ll install what you chose. If you haven’t, we’ll guide you to a floor that fits the space. Call (844) 460-4481 for a free estimate.
How does Henderson’s dry climate affect a hardwood floor?
Wood responds to indoor humidity, and the desert’s seasonal swings mean acclimation and moisture control matter before installation. How long wood needs to acclimate depends on the product and the home, and the product instructions and written estimate set that. We plan for it so your floor stays flat.
Can you repair a section instead of replacing the whole floor?
Sometimes, yes. Floor repair runs $230 to $1,395 per job and covers damaged boards, squeaks and localized problems. Whether a repair makes sense depends on how much of the floor is affected. Call (844) 460-4481 and we’ll give you the straight answer.
Hardwood is the floor that rewards getting the install right the first time. The subfloor, the acclimation, the choice between solid and engineered: each one is a decision that sets how the floor looks and wears for years. We install what you’ve already chosen from the brands we know work, or help you choose from Shaw, Mohawk, Mannington, Armstrong and the rest of our line, and we handle the carpet and tile in the same home so you’re not juggling three contractors. Our technicians have up to 9 years of experience across hardwood, tile and carpet. Call (844) 460-4481 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day estimates are often possible, and the estimate is always free.
Pricing reflects the Henderson market as of 2026. Henderson Flooring Installation offers free estimates – call (844) 460-4481.
Written by the team at Henderson Flooring Installation.
What Our Customers Say
"Replaced about a dozen damaged boards in an older hardwood floor and the new ones blend in so well I had to ask him which ones they were."
- Allen Lin"Sanded and refinished the hardwood in our hallway and two bedrooms. The dust control was better than I expected, and the grey traffic path by the front door is gone."
- Ramon Salazar"Our old carpet had rippled in the living room. They stretched it back flat instead of selling me new carpet, and it has stayed tight."
- Hector Morales